It is very important to pay attention to the operation before and after the use of the three-in-one filling machine, which is the key to the installation, debugging, use and maintenance of the filling machine.This is related to the quality of the filling machine production enterprises, the efficiency of the basic work.
First of all, before the use of the three-in-one filling machine, first to install and then adjusting, before adjusting to carefully read the instructions, prepare the tools in advance.
After the filling machine is installed, set the filling track and bottle receiving plate to the level, fill the liquid storage bucket with materials, and all the electrical switches are in the closed position.
Connect to the external power supply. The power socket must be a three-pin socket with a reliable grounding wire to prevent electric shock in case of leakage of the housing.
Use the support plate of filling frame of three-in-one filling machine to support the filling frame.
Use your fingers to push the positioning sleeve on the filling head upward. The positioning sleeve should be able to move up and down flexibly.
Turn the switch under the liquid storage bucket to the “on” position, so that the material can flow into the total metering pump, according to the total volume of each container filling, adjust the screw on the crank, turn the knob of the filling speed board to about 20 degrees, and then turn the switch on the filling speed board to the “on”position.
Jiangsu MESURE machinery Co., Ltd is a professional company engaging in designing, manufacturing, installation, commissioning and training of drinking water, juice, carbonated soft drink, dairy drink and alcohol industry.
