3-in-1 Filling machine

For the food industry, its better development is inseparable from the three in one filling machine and filling production line. Take the three in one filling machine as an example, its successful development solves the filling problem for the daily chemical industry and food industry, which not only can better guarantee the product quality, but also better improve the production efficiency of the enterprise.

It is very important to pay attention to the operation of the three in one filling machine before and after use, which is the key to the installation, commissioning, use and maintenance of the filling machine. This is the basic work related to the quality and efficiency of the filling machine production enterprise.

First of all, before using the three in one filling machine, it is necessary to install and then debug it. Before debugging, it is necessary to carefully read the instructions and prepare the tools used. After the filling machine is installed, the filling track and bottle receiving tray are adjusted to be horizontal, the liquid storage barrel is filled with materials, and all electrical switches are in the closed position. Insert the container to be filled into the tooling box, connect the external power supply, the power socket must be a three pin socket, and have a reliable grounding wire, to prevent the machine power switch from being turned on in case of leakage of the enclosure, and the power indicator light will be on. The support plate of the filling frame of the three in one filling machine is used to hold the filling frame, and the positioning sleeve on the filling head is pushed upward with fingers. The positioning sleeve shall be able to move up and down flexibly, and the filling needle in it shall not be exposed or retracted. Turn the switch under the liquid storage barrel to the open position, so that the materials can flow into the main metering pump. Adjust the screw on the crank according to the total filling amount of each container, turn the knob of the filling speed regulating board to about 20 degrees, and then turn the switch on the filling speed regulating board to the open position.

After using the three in one filling machine, pay attention to its maintenance. When removing and cleaning the piston and the fixing screw, remove the fixing screw at the same time, so as to avoid affecting the other process requirements when removing one. Before the cleaning of piston filling machine, the remaining products should be removed, and then the barrel should be filled with soft cleaning liquid. The cylinder has been lubricated before leaving the factory. Please do not open or add any lubricating oil to ensure that the surface of the filling machine is clean and clean. When it is not working, power off is required. In addition, in the maintenance and correct use of the filling machine at the same time, but also regular testing, debugging, only in this way can the filling machine work healthy and stable.